Winbook N7405JV, Инструкция по эксплуатации

Страница: 21 / 22

- 18 -
7 FAQ
1) Incorrect power adapter will damage the equipment or power adapter
When connecting a power adapter, please check the voltage carefully, it should be a 5V
adapter for this equipment.
2) Slowly browse speed
This equipment uses an MJEPG compression format, it needs a lot of network bandwidth,
less bandwidth will affect browsing speed. Typical bandwidth requirements are:
640x480@10fps : 4.0 Megabits
～
5.0 Megabits
320x240@30fps : 1.2 Megabits
～
1.6 Megabits
3) Color difference
The default mode is infrared lens, when viewing outdoor or strong infrared light scenes,
there may be color distortion where the colors displayed do not match the actual. User can
switch to the color mode lens to solve this problem, but the color lens can only be used in
daylight.
4) Can’t find camera via search software after connecting to LAN
Make sure the camera and PC are on the same LAN. If firewall software is installed, please
close or suspend it and try again.
5) Can find camera via search software, but can’t view video feed
If the IP address of IP camera and PC are not in the same Network Segment, you should
configure them on the same Network Segment before trying to view the camera feed. The
Network Segment is the first three numbers of the IP address. For example, if the IP
address of your PC is 192.168.0.100, it can only view cameras with IP addresses between
192.168.0.1 and 192.168.0.255.
6) Can connect to camera via public IP address, but can’t connect via manufacturer’s
domain name
Make sure the DNS setting in the search tool is the same as your PC settings; the DNS 1
and DNS 2 settings for both should be same.