Winbook N7405JV, Инструкция по эксплуатации, Страница: 17 / 22

- 14 -
In alarm mode, the camera will take a still image and send it to an FTP server. Please make
sure your FTP settings are correct. See Figure 21 for reference. When all the information
has been entered, click “Test” to see if the settings work.
After configuring an FTP server, you can use the “Upload Image Periodically” function.
Even with no alarm, the camera can periodically send a still image to the FTP server.
In order to use the FTP function, User should apply for a user name and password from the
FTP server first. Also please apply for data storage space and the authority to create
sub-directories on the server.
5.2.4 Alarm Server
Figure 22
Please confirm if you have connected to the alarm server. The alarm message format is as
follows:
GET /api/alarm.asp
？
Username=username&
Usurped=password&
Rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port) &
io=0
The Alarm server needs developing by user. User can extend other functions on this server,
like SMS, MMS alarm, and mobile phone etc.
5.3 Advanced
5.3.1 User Setting
There are three levels of authority; Administrator, Operator and Visitor. Administrator status
has the authority to make any setting changes. Operator can only operate the IP camera
and can’t change settings. Visitor status can only watch the video feed and can’t operate
the IP camera.
By default, the administrator’s User Name is admin & the password is: 123456 .
Figure 23