6000Counts Pocket Type Intelligent Scanning Digital Multimeter
4
/
8
5
．
Technical Specifications
1
．
DC voltage / AC voltage automatic scanning test (DCV / ACV)
Input impedance: 10M
Ω
; overload protection: 1000V DC or 750V AC peak.ture Validity Measurement: frequency response 50Hz-1kHz;
The specific operations are as follows:
1-1. Long press POWER is greater than 2S, the boot display is automatically scanned state "AUTO".
1-2. The black test lead is negative, the red test lead is positive, and the test lead reliably touches the test point.
1-3. When the voltage measured at the negative end of the black test lead input port and the positive end of the red test lead is greater than 0.8V,
regardless of the AC voltage or the DC voltage, the meter will compare the DC component and the AC component, take the larger component
signal, and then according to the measured value The size is automatically switched between 6V/60V/600V/1000V, and then the measured value is
displayed on the LCD.
Note:
1) The input voltage must not exceed DC1000V or AC750V. If it exceeds, there is danger of damage to the instrument circuit. When high voltage
circuit, pay special attention to avoid electric shock;
2) After completing all measurement operations, disconnect the test leads from the circuit under test.
2. Resistance
（Ω）
Accuracy
Range
6000counts
Resolution
DC/AC6V
±（
0.8%+5
）
0.001V
DC/AC60V
0.01V
DC/AC600V
0.1V
DC1000/AC750V
±（
0.8%+10
）
1V
Accuracy
Range
6000counts
Resolution
600
Ω
±（
0.8%+5
）
0.1
Ω
6k
Ω
±（
0.8%+3
）
1
Ω
60k
Ω
10
Ω
