Win4NET AOD9812, Инструкция по эксплуатации

Страница: 13 / 20

12
Installation - Varifocal Lens Models
1 Use the supplied L-wrench to remove the four fixing screws (B)
of dome cover (A).
2 Align the camera unit with the surface of the ceiling,
make marks on the ceiling in the places where the
screw holes are to be drilled, and then drill the four holes.
3 Cut a hole (diameter2.9in.73mm) in the ceiling for routing the
cables.
4 Pass the power cable (E) and video cable (F) from the
camera unit through the cable hole in the ceiling.
5 Align the four screw holes in the camera unit (D) with
the screw holes in the ceiling, and then secure the
camera in place by tightening the four or more screws
(C) throught the washers.
6 Carry out the settings and adjustments for the camera.
7 Secure the dome cover (A) by tightening the screws (B).
A
B
D
C
E F