Win4NET AOD9812, Инструкция по эксплуатации

Страница: 12 / 20

11
Installation - 3.6mm Fixed Lens Models
1 Use the supplied hexagon wrench to remove the four fixing
screws (B) of dome cover (A).
2 Make screw holes and a cable hole in the supplied cushioning
sheet (D) that attaches to the back of the camera unit (C) .
3 Attach the cushioning sheet (single-sided tape)(D) to the back of the
camera unit.(C).
4 Align the camera unit with the surface of the ceiling, make marks on
the ceiling in the places where the screw holes are to be drilled, and
then drill the four holes.
5 Cut a hole (diameter:73mm) in the ceiling for routing the cables.
6 Pass the power cable (E) and video cable (F) from the camera unit
through the cable hole in the ceiling.
7 Align the four screw holes in the camera unit (C) with the screw holes
in the ceiling, and then secure the camera in place by tightening the
four or more screws (G) throught the washers.
8 Carry out the settings and adjustments for the camera.
9 If the dome liner (H) is secured in place, loosen the screw (I).
Adjust the dome liner (H) so that the dome camera's lens is visible
from the camera window, and then use a philips screwdriver to fix the
dome cover.
10 Secure the dome cover (A) by tightening the screws (B).
A
B
C
D
E
G
F
I
A
B
C
D
E
G
F