User’s Manual
WIN Enterprises, Inc.
JUL., 2011
64
5.) You are now ready for reassembly. Tilt the unit on its back paying close attention
to the Mylar shielding under the motherboard. When re-attaching the bezel be sure the
bezel tongues/flanges go
under
the Mylar shroud and that they
do not
come into
contact with the board in order to avoid a short of the motherboard to the chassis.
6.) When sliding the bezel over the front of the unit, guide the securing tab of the
PCIe Card’s I/O bracket through the front of the bezel. In addition, look at the notch
cut into the bezel making sure the PCIe riser card fits cleanly through.
Secure the card with the supplied silver screw.
