Win PL-80350 Скачать руководство пользователя страница 35

Страница: 35 / 66

User’s Manual

WIN Enterprises, Inc.

JUL., 2011

2. Use the arrow keys to move between items and to select values. Modify

the selected fields using the PgUP/PgDN keys. Press the <F1> “Help”

key for information on the available options:

Clear NVRAM: [No]

This item allows you to clear NVRAM during system Boot.

Plug & Play O/S: [No]

No: lets the BIOS configure all the devices in the system.

Yes: lets the OS configure Plug & Play devices not required for boot if your

system has a Plug & Play operating system.

PCI Latency Timer: [64]

This item allows you to select the value in units of PCI clocks for the PCI

device latency timer register. This setting controls how many PCI clocks each

PCI device can hold the bus before another PCI device takes over.

Allocate IRQ to PCI VGA: [Yes]

BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ.

Palette Snooping: [Disabled]

This item allows you to enable or disable the feature. When set to [Enabled],

the palette snooping feature informs the PCI devices that an ISA graphics

device is installed in the system so that the device can function correctly.

PCI IDE BusMaster: [Enabled]

This item allows you to enable or disable the feature.

Enable: BIOS uses PCI bus mastering for reading/writing to IDE devices.

OffBoard PCI/ISA IDE Card: [Auto]

Some PCI IDE cards may require this to be set to the PCI slot number that is

holding the card.

IRQ 3/4/5/7/9/10/11/14/15: [Available]

Available: the specified IRQ is available for use by PCI/PnP devices.

Reserved: the specified IRQ is reserved for use by legacy ISA devices.

Содержание PL-80350



































































Результаты поиска

Содержание PL-80350

Отзывы:

Похожие инструкции для PL-80350

Бренды по названию

Популярные бренды

Win PL-80350, Руководство пользователя

Результаты поиска

Содержание PL-80350

Отзывы:

Похожие инструкции для PL-80350

Бренды по названию

Популярные бренды