WIN Enterprises PL-80150, Руководство пользователя

Страница: 63 / 86

Stop bits indicate the end of a serial data packet. (AA start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow devices may
require more than 1 stop bit.
Flow Control
Flow control can prevent data loss from buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be sent to re-star t the flow. Hardware flow
control uses two wires too send start/stop signals.
VT--UTF8 Combo Key Support
Enable VT-UTFF8 Combination Key Support for ANSI/VT1000 terminals.
Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal data.
Resolution 100x31
Enables or disables extended terminal resolution.
Legacy OS Redirection Resolution
On Legacy OS, the Number of Rows and Columns supported redirection.
Putty Keypad
Select Function Key and Key Pad on Putty.
Redirection After BIOS POST
The Settings specify if BootLoader is selected than Legacy console redirection is
disabled before booting t o Legacy OOS. Default value is Always Enable which means
Legacy console Redirection is enabled for Legacy OS.
4.5 Chipset
4.5.1 North Bridge / IOOH Configuration