WIN Enterprises MB-73440 Скачать руководство пользователя страница 61

Страница: 61 / 82

MB-73440

Disabled

reboot during restart in order to change State of the Device.

Pending operation

None

TPM Clear

Schedule an Operation for the Security Device. NOTE: Your

Computer will reboot during restart in order to change State of

Security Device.

Select Device Type

TPM 1.2

TPM 2.0

Auto

TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will

restrict support to TPM 2.0 devices, Auto will support both with

the default set to TPM 2.0 devices if not found, TPM 1.2 devices

will be enumerated

6.2.2. CPU Configuration

Feature

Options

Description

CPU

Info only

Manufacturer, model, speed

CPU Signature

Info only

Display CPU Signature.

Microcode Patch

Info only

Display Microcode Patch.

Max CPU speed

Info only

Display Max CPU speed.

Min CPU speed

Info only

Display Min CPU speed.

CPU Speed

Info only

Display CPU Speed.

Processor Cores

Info only

Display Processor Cores.

Hyper Threading

Technology

Info only

Display Intel HT Technology support or not.

Intel VT-x Technology Info only

Display Intel VT-x Technology support or not.

Intel SMX Technology Info only

Display Intel SMX Technology support or not.

64-bit

Info only

Display 64-bit support or not.

EIST Technology

Info only

Display EIST Technology support or not

CPU C3 state

Info only

Display CPU C3 state support or not

CPU C6 state

Info only

Display CPU C6 state support or not

CPU C7 state

Info only

Display CPU C7 state support or not

CPU C8 state

Info only

Display CPU C8 state support or not

CPU C9 state

Info only

Display CPU C9 state support or not

CPU C10 state

Info only

Display CPU C10 state support or not

L1 Data Cache

Info only

Display cache info.

Содержание MB-73440



















































































Результаты поиска

Содержание MB-73440

Отзывы:

WIN Enterprises MB-73440, Руководство пользователя, Страница: 61 / 82

Результаты поиска

Содержание MB-73440

Отзывы: