WIN Enterprises MB-73440 Скачать руководство пользователя страница 60

Страница: 60 / 82

MB-73440

6.1. Main

6.1.1. BIOS Information

Feature

Options

Description

BIOS Vendor

Info only

BIOS source code provider.

Core Version

Info only

AMI BIOS core version.

Compliancy

Info only

Compliance with UEFI version.

Project Version

Info only

WIN BIOS version.

Build Date and Time Info only

WIN date the BIOS was build.

6.1.2. Memory Information

Feature

Options

Description

Total Memory

Info only

Display installed memory size.

6.1.3. Date and Time

Feature

Options

Description

System Date

Week-day,

MM/DD/YYYY

Requires the alpha-numeric entry of the day of the week, day

of the month, calendar month, and all 4 digits of the year,

indicating the century and year (Fri XX/XX/20XX)

System Time

HH/MM/SS

Presented as a 24-hour clock setting in hours, minutes, and

seconds

6.2. Advanced

6.2.1. Trusted Computing

Feature

Options

Description

Security Device

Support

Enabled

Disabled

Enables or Disables BIOS support for security device. When

disabled OS will not show Security Device. TCG EFI protocol and

INT1A interface will not be available

TPM State

Enabled

Enable/Disable Security Device. NOTE: Your Computer will

Содержание MB-73440



















































































Результаты поиска

Содержание MB-73440

Отзывы:

WIN Enterprises MB-73440, Руководство пользователя, Страница: 60 / 82

Результаты поиска

Содержание MB-73440

Отзывы: