WimTec SKY Series, Руководство по сборке и эксплуатации

Страница: 22 / 28

22 Washbasin fitting WimTec SKY
EN
SKY
Configuring the functions
Enable the continuous flow function to fill the washbasin or a container.
‘ON’ position: Continuous flow function is enabled.
‘OFF’ position: Continuous flow function is disabled (default setting).
Continuous flow:
DIP switch 3
ON
OFF
2 3 4 5 6 1
Enable continuous flow
Approach the active range
with your hand. After starting
the water flow tip for 3 s on
the sensor ring.
Disable continuous flow
The function automatically
ends after the water arrest
time set at time control has
elapsed.
To instantly end continuous
flow, perform the same steps
as used for ‘Enable
continuous flow’.
3 s
um 07:00 Uhr