22 Wall fitting
WimTec OCEAN W7
EN
OCEAN W7
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
This manual is valid for the following products:
WimTec OCEAN W7 wall fitting for 12-V external power supply:
Projection 185 mm
Glass white
Art. no. 118 674
Projection 185 mm
Glass black
Art. no. 118 698
Projection 240 mm
Glass white
Art. no. 118 681
Projection 240 mm
Glass black
Art. no. 118 704
Delivery scope:
Safety glass front plate with chrome frame, mixer handle and
integrated sensor with electronic module, without flush-mount
power supply.
Congratulations on purchasing the WimTec OCEAN W7 wall
fitting.
In order to ensure that you will be able to enjoy this
high-quality fitting for many years, please take note of the follow-
ing cleaning and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing or acidic cleaning agents or
disinfectants or those with a nano protective coating
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
Limescale deposits around the shower and bath tub combined with
wetness can impair the AquaCap function. To prevent this outcome,
we recommend regular cleaning of the glass panel using a power
cleaner.
Important installation notes:
Provide for a flush-mount box for an optional power supply outside
of the protected zone. Mounting and installation may only be
performed by a qualified service provider in accordance with DIN
1988, ÖVE/ÖNORM E8001 and VDE 0100 Part 701. When planning
and installing sanitary facilities, all relevant local, national and
international standards and provisions must be observed.
