WimTec OCEAN W6, Инструкция по установке и эксплуатации

Страница: 29 / 40

Wall fitting WimTec OCEAN W6 29
EN
OCEAN W6
Assembly
12
16 17
12.
Correctly align the mounting frame.
Apply the included special grease to the front of the gasket.
13. Configure the electronics module with the desired function
settings (see p. 25).
14. Check the thermostat position – the white arrow should be
pointing directly upwards.
15. Check the position of the thermostat handle– the locking knob
should be pointing directly upwards.
16.
Carefully guide the spout pipe through the glass plate.
17. Insert the front plate at an angle, and apply some pressure
while turning it until it is aligned horizontally.
18.
Place the plastic spacer ring over the spout pipe towards the
front plate.
14
15
13