WimTec LOFT, Руководство по сборке и эксплуатации

Страница: 24 / 32

24 Washbasin fi tting WimTec LOFT
Hy Plus
EN
LOFT
Hy Plus
Function description
Continuous fl ow:
DIP switch 3
Enable the continuous fl ow function to fi ll the washbasin or a container.
‘ON’ position = Continuous fl ow function is enabled.
‘OFF’ position = Continuous fl ow function is disabled (default setting).
ON
OFF
2 3 4 5 6 1
3 x
um 07:00 Uhr
Activate continuous fl ow:
1. Approach the infrared sensor with your hand
(approx. 3 cm) and dwell - the water fl ow starts.
2.
After the control LED fl ashes 3 times the continuous
fl ow will be activated for the set fl ush stop time.
Cleaning stop activated:
1. Approach the infrared sensor with your hand
(approx. 3 cm) and dwell - the water fl ow starts.
2.
After the control LED fl ashes 5 times the water fl ow
stops and the cleaning stop is activated for 3 min.
3. After further 3 times fl ashing the water fl ow starts again and
the continuous fl ow is enabled for the set fl ush stop time.
Deactivate continuous fl ow:
Automatic:
After the fl ush stop time has elapsed
(DIP switch 5, see page 26).
Manual:
1. To instantly end the continuous fl ow, approach the infrared
sensor with your hand (approx. 3 cm) again and dwell.
2. After the control LED fl ashes 3 times the continuous fl ow
is disabled and the fi tting will resume normal operation.
|
um 07:00 Uhr
3x
um 07:00 Uhr