WiMo Ultra Beam YAGI 2, Руководство пользователя

Страница: 8 / 11

8
5) ELECTRICAL WIRING
The electrical wiring, built and assembled by UltraBeam, is the best solution for electric connection
between the antenna and the electronic controller.
In these cases, the antenna motor units will be equipped with multi-pole female connectors.
Simply plug in the connectors to the motor unit and the DB25 to the controller. This avoids any
chance of operating errors and guarantees high reliability over time.
Furthermore, the assembled wiring does not contain any junction points along the route, which is often a
cause of bad electrical contacts especially for external systems. Each wire runs from the controller to the
motor. For more details, see ‘wiring’ manual on download page of www.ultrabeam.de
The multi-wire cables used in the construction of the wiring are build specifically
according to UltraBeam specifications.
Water resistance and protection against UV rays make the wiring particularly suitable
for outdoor use and offer increased reliability compared to common commercial cables.
The connectors used are IP68 compliant with gold contacts by Switchcraft Inc.