Battery maintenance and care
Make sure that your battery is always securely fastened.
A proper connection to the mains supply of the electrical system must be ensured at all
times.
Keep the battery clean and dry. Apply a thin layer of grease to the terminals with an acid-
free and acid-resistant grease (e.g. Vaseline).
For batteries that are not maintenance-free, check the acid level about every 4 weeks and
top up with distilled water if necessary.
Danger!
Always disconnect the mains plug before starting cleaning work.
Cleaning
Keep all safety devices, ventilation openings and the motor housing as free of dirt and dust
as possible. Wipe the unit with a clean cloth or blow it out with compressed air at low pres-
sure.
We recommend cleaning the unit immediately after each use.
Clean the unit regularly with a damp cloth and a little soft soap. Do not use any cleaning
agents or solvents; these could attack the plastic parts of the unit. Make sure that no water
can penetrate the appliance. The ingress of water into a power tool increases the risk of
electric shock.
The charger should be placed in a dry room for storage. Any corrosion must be removed
from the charging terminals.
Maintenance
There are no parts inside the unit that require additional maintenance.
Troubleshooting
If the unit is operating properly, you should not have any problems with malfunctions or errors. In case
of malfunctions or errors, please check the following before contacting a specialist:
Fault
Possible cause
Possible solution
Unit does not charge
Charger terminals incorrectly
connected
Connect the red clamp to the
positive terminal and the black
clamp to the body.
Contact between the charger
terminals
Prevent contact.
Battery defective
Have the battery checked by a
specialist and replaced if neces-
sary.
Technical data
Input voltage (V)
220–240
Frequency (
㎐
)
50
Rated power (W)
max. 70
Rated output voltage (V)
6 / 12 (DC)
Rated output current at 6 V (A)
2
Rated output current at 12 V (A)
2 (slow charging) / 4 (fast charging)
Battery capacity (Ah)
4–120
https://www.XPOtool.com
Article 62971, 62972
Page 7
The Tool Experts
04 2021
-1
