WilTec XPOtool 62971 Скачать руководство пользователя страница 3

Introduction

Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our cli-

ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.

Keep these operation instructions safe.

Safety instructions 

Caution!

When using the appliance, some safety precautions must be observed to avoid injury and damage. 
Read the operating instructions and the safety instructions completely and carefully. Keep these in-
structions in a place where you can access them at any time. If you pass the appliance on to someone
else, pass on these operating instructions and the safety regulations as well. We accept no liability for 
damage or accidents caused by failure to follow these instructions and the safety instructions.

1. The series battery chargers are designed for charging lead-acid batteries, gel batteries and 

AGM batteries. They cannot be used as a DC power source or for any other purpose to pre-
vent accidents such as fire and electric shock.

2. The charger is only designed for a suitable power outlet. If the power cable needs to be ex-

tended, ensure that the extension cable is of sufficient size to supply power over the re-
quired distance.

3. If the charger is interrupted while charging or other damage is caused by exposure to a viol-

ent impact, discontinue use immediately.

4. The charger must not be disassembled. If repairs are necessary, they must be carried out 

by a qualified electrician. Improper reassembly may result in a fire hazard and/or electric 
shock. 

5. Disconnect the charger from all connected batteries and from the mains before cleaning the

housing. 

6. Disconnect the charger from the mains after charging is complete. Then remove the battery 

connector. 

7.

Warning! 

Explosive gases are produced during charging; therefore, avoid sparks and na-

ked flames or smoking in the vicinity of the unit. 

8. Only charge the battery in ventilated rooms. It is strictly forbidden to use the unit in a vehicle

or under the closed bonnet. 

9. The battery charger cannot be used for non-rechargeable batteries.
10. If the mains cable is damaged, it must be replaced by a qualified electrician to avoid a haz-

ard.

11. The battery terminal that is not connected to the vehicle must be connected first. The other 

connection must be made on the vehicle, at a sufficient distance from the battery and the 
fuel line. The battery charger must then be connected to the power supply.

12. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appli-
ance. 

13. Batteries store a large amount of energy. Be sure to avoid short-circuiting the battery or 

charger terminals, otherwise the energy stored in the battery will be released immediately. 
This may result in fire or injury. 

14. Do not allow children to play with the appliance. 
15. Cleaning and user maintenance must not be carried out by children without supervision.

https://www.XPOtool.com 

Article 62971, 62972

Page 3 

The Tool Experts

  

04 2021

-1

Содержание XPOtool 62971









Отзывы: