© by WilTec Wildanger Technik GmbH
Seite 4
http://www.wiltec.info
Installation on a concrete wall
Attention: concrete rawl wall plugs or special rawl plugs must be used from the local ironware
trades.
1. First place the wall plate on the wall with the help of the bubble level.
2. Mark right and left the upper, middle and lower oblong holes.
3. First drill bores with a 10 mm – masonry drill.
4. Insert in every hole a concrete rawl plug and if necessary hammer it carefully in the borehole.
5. When the rawl plugs are inserted, place the wall plate over them so that the position of the
rawl plugs coincides with that of the oblong holes.
6. Screw the hex lag bolts in the rawl plugs, tighten them lightly and screw tightly only after all
hex lag bolts have been already inserted.
Installation of TV-screen bracket
1. This kit includes different screws with different lengths and diameters for an optimum mounting.
2. Put the TV-Screen on a soft surface and search the
threaded holes on the back.
3. Determine the depth of the drilling by using a straw or
toothpick.
4. If your TV-Screen has a concave back, use the spacer.
Tip: use the smallest possible spacer, to keep the distance
screen - mounting support as small as possible.
5. Insert the spacer between the screen and the mounting
support.
6. If a smaller screw (M4, M5 or M6) is used, please use a
washer for every screw for improving the stability.
Final installing
Fix the mounting support on the screen, by placing the holes of the mount support over the threaded
holes of the screen’s backside.
Insert
the
suitable
screws
with
washers in the holes and screw them
in.
1. Screw in tightly with a cross-
recess screwdriver.
Attention:
The installing has to be
carried out by at least two
qualified
people
.
2. To complete the installing, hook
both perpendicular brackets into
the backside of the screen, in both
horizontal cross bars.
3. When hooking into, make sure
that the safety screws of the
mount are not screwed in.
