
© by WilTec Wildanger Technik GmbH
Seite 3
http://www.wiltec.info
Pieces (each bag):
1.
(4x) M4x12 screw
(4x) M4x30 screw
(4x) M4 toothed washer
4
.
(4x) M8x16 screw
(4x) M84x0 screw
(4x) M8 toothed washer
2.
(4x) M5x12 screw
(4x) M5x30 screw
(4x) M5 toothed washer
5
.
(4x) M4/M5 Spacer
(4x) M6/M8 Spacer
(4x) M4/M5 washer
3.
(4x) M6x12 screw
(4x) M6x35 screw
(4x) M6 toothed washer
6
.
(1x) Bubble Level
(6x) M86x0 Hex lag bolt
(6x) Washer
(6x Concrete rawl plugg
Necessary tools:
ü
Crosstip screwdriver
ü
Metal detector for drywall-mounting
ü
Screw wrench
ü
Drill machine with 10 mm masonry drill
Note:
For the mounting of the wall plate introduce the level in
the tube and after the installing take it out.
Installing on a drywall construction
For a safe drywall mounting please use two wooden beams/rails placed at least at a 30 cm
distance from each other.
1. Use a metal detector to find two adjoining rails and mark their position.
2. Place the wall plate on the desired place with the help of a second person and the level.
3. Mark right and left the upper, middle and lower oblong holes, that are above the beams or rails.
4. All in all 4 or 6 places have to be marked.
5. First pre-drill a 3 mm hole in the wall.
6. Assisted by a second person, position the wall plate on the wall and place the oblong holes over
the drilled holes so that they match.
7. In each hole insert a hex lag bolt with washer.
8. Tighten the hex lag bolts clockwisely.
Beware:
Do not fasten the bolts too tightly in order to avoid causing damage to the wall.
Beware:
Do not let go of the wall plate, before it is properly fixed.