© by WilTec Wildanger Technik GmbH
Seite 5
http://www.wiltec.info
Operation of the pressure relief station with filter
a) Pressure regulator
b) Manometer
c) Water drain plug
Product name:
Pressure regulator with filter and manometer
Type:
HS-F2
Specifications:
The HS-F2 is an in-line low pressure regulator with 9 bar (100 psi) manometer and water drain plug.
This regulator allows you to control the pressure and helps generating clean, dry, pressure-stable air.
The regulator can be used only according to the operating instructions.
Operation:
1. The manometer reports the working pressure of the air tool.
2. Pull up the adjusting knob; its clockwise rotation increases the pressure, and a counter-clockwise
rotation reduces the pressure.
3. Rotate the adjusting knob to achieve the right working pressure and fixate it downwards by
clicking it into place.
4. Do not rotate the knob against high resistance. If necessary the height and the position of the of
the knob can vary slightly.
5. For emptying the condensed water collector use the water drain plug.
Assembly
a)
Switch
b)
Pressure regulator
c)
Manometer
d)
Air connection
e)
Air filter
f)
Mains plug