© by WilTec Wildanger Technik GmbH
Seite 3
http://www.wiltec.info
SAFETY GUIDELINES
:
•
The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
•
Never expose the device to dust, acid, steam, explosive or flammable gases or atmospheric
influences (rain, sun, fog, snow).
•
The vacuum pump can be operated only in an appropriate environment (well ventilated,
ambient tempe5 - +40 degrees C).
•
Never use the compressor barefoot or with wet hands or feet.
•
Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
•
Do not open or damage any part of the compressor. If necessary please contact your seller.
•
Release the water by opening the drain valve. Always do so before not using the compressor
for a long time. Store the compressor in a well ventilated place.
•
Always wear goggles. Under no circumstances should you direct the airflow towards your
body or other persons’ bodies.
•
Never use in areas with steam or moisture or close to water.
•
Switch off the compressor if you do not use it. Disconnect from mains before you repair,
recondition, maintain, clean or replace parts.
Never use the power cable as handle. Keep the
power cable away from hot objects, oil and sharp edges. Protect it against breakage. Do not
pull the power cable in order to unplug it from the power socket.
•
If the compressor is used outdoors
,
only approved extensions may be used
.
Every wire of the
extension cable must have at least 1, 5 mm
2
cross- section.
•
Do not store the compressor with the plug inserted into the plug. Do not allow children or any
other people who are not able to handle this device to play or work with it.
•
Be very careful when you are working with the compressor. Do not use it if you are tired.
Persons under the influence of alcohol, drugs or medication are not allowed to use this device.
•
When you start working make sure that all screws are tightened.
•
Do not use the compressor if it is damaged. If the compressor generates unusual noises and
strong vibrations or
if other unusual signs occur that indicate some damage you should turn
off the compressor immediately. For repairs please use only original spare parts. Do not make
any technical modifications to the compressor. In case you cannot eliminate the malfunction
hand over the device to your seller
.
•
Sie das Gerät Ihrem Verkäufer.
Properties
1. Diaphragm compressor
2. Oil free, diaphragm compressor, no polluted air
3. Overheat protection
4. Very low noise level
Field of application
The Airbrush compessor AS06 is suitable for Airbrushes and can be used for
handicraft cosmetics, tattoos, surface colours, hobby, model-toys, finger nails. It can also be used as
air source for medical applications, environmental protection, aquariums, food and chemical industry,
laboratories.
It can also be employed for inflating tyres (bicycle, motorcycle, car) and balloons. The constant and
sufficient output is achieved by means of diaphragm that has the multiple life of classic piston. High
spray quality almost noiseless working and low weight characterise the energy-saving diaphragm
compressor.