WilTec 61955 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 22

WilTec 61955 Скачать руководство пользователя страница 20

Storage

Attention:

Prepare your device for storage at the end of the season or if you will not need it for more

than 30 days.



Allow the engine to cool and secure the device before storing or transporting it.



Store the device and fuel in a well-ventilated place that is safe from flying sparks and open
flames from devices such as water heaters, electric motors, switches, stoves, etc.



Store the device with all protective devices. Put the device down so that nobody can acci-
dentally injure themselves on sharp parts of the device.



Keep the device and fuel out of the reach of children.

Exterior



Clean your device carefully before storing it for a long period of time. Keep the device in a
clean, dry place.



The outer metal surfaces should be lightly oiled.

Interior



Remove the spark plugs and pour a teaspoon of two-stroke (air-cooled) engine oil into the
spark plug opening. Slowly pull the starter cord eight to ten times to distribute the oil.



Replace the spark plug with a plug of the appropriate type and heat rating.



Clean the air filter.



Check the entire device for loose screws, nuts and bolts.



Replace any damaged, brittle, or worn parts of the device.



Always start the new season with fresh fuel in the correct petrol-oil ratio.

Others:



Do not store fuel for the next season.



Replace your fuel canister as soon as it starts to rust.

© by WilTec Wildanger Technik GmbH

Article 61955

Page 20

http://www.WilTec.de
http://www.aoyue.eu

12 2020

-1

http://www.teichtip.de

«
...
18
19
20
21
22
»

Содержание 61955























Отзывы:

Нет отзывов