
3. Align the tabs on the inside of the suction port with the slots on the suction tube.
4. Push the upper suction tube into the suction opening. Rotate the tube to the right until it clicks secu -
rely into place on the suction cup and is firmly seated.
5. Arrange the beveled end of the suction tube as shown. Push the lower into the upper suction tube
until the lower suction tube is firmly seated in the upper suction tube (approx. 7 cm). After pushing the
two suction tubes together, position the marking on the lower part of the upper tube. Screw the two tu-
bes together using the screw provided.
Warning:
Before starting the engine, both the lower and upper vacuum tubes must be installed and
each section of the tube must be screwed in place.
© by WilTec Wildanger Technik GmbH
Article 61955
Page 11
http://www.WilTec.de
http://www.aoyue.eu
12 2020
-1