WilTec 61823, Руководство по эксплуатации

Страница: 4 / 5

© by WilTec Wildanger Technik GmbH Item 61823 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021 -1
http://www.teichtip.de
•
Check the bracket screws and nuts every 3 hours. Make sure that they are tightened securely.
•
Before plugging in the power plug, make sure that the power tool switch is in the off position.
•
Let the drill run idle for a few minutes before starting work.
•
Never stop the tool with your hands or other objects.
•
Never overload the tool and make sure that it always works without undue stress.
•
Follow the instructions of the manufacturer of the power tool and the grinding wheels used. Only
use angle grinders with a max. grinding wheel cutting speed of 80
㎧
.
•
Only use grinding wheels with specifications for cutting ferrous and low-alloy materials, pipes
and sections with a maximum cutting speed of 80
㎧
.
•
Never use circular saw blades or ceramic grinding discs.
Recommendations for use and application
•
When cutting wheels are used, the guard must be fitted to the carrier, the protective cover to
the power tool.
•
The protective cover of the power tool be always oriented so that it can protect the user from a
potential explosion.
•
Avoid working from an unstable position.
•
Grinding wheels must always be stored in a dry place where they cannot be hit or fall down.
•
Assure yourself of the perfect condition of the grinding wheel used. Perform a sound test to
ensure that the grinding wheel is not making a sound indicating damage.
•
Use cutting wheels with a maximum diameter of 230 mm and never allow them to wear out over
80 mm.
•
Only use grinding wheels with a speed equalling at least the one of the power tool idling.
•
The grinding tools used must always be properly installed and be able to rotate freely. Immedi-
ately stop using deformed or vibrating grinding wheels.
•
Replace all worn grinding wheels before they touch the mounting plates of the grinder or when
they have been subjected to impact.
•
Never work on materials such as glass, ceramics, plastic, wood, etc.
•
The workpiece must always be securely clamped before work.
•
Never exert lateral pressure on cut-off wheels.
Technical specifications
Max. work piece size (
㎜
)
metal sheets, tubes from ferrous alloy 60 × 40
round bars 30
Suitable for angle grinders with
a max. grinding wheel speed (
㎧
) 80
handle attachments (
㎜
) min. 95 – max. 115