Specific operation warnings
Warning
Blade Hazard. Keep hands clear from the blade when operating.
Wear the proper safety gear including safety glasses and gloves.
Fasten the shears to a sturdy, level surface that is capable of holding the load of the shears
and workpiece before use.
The shears blades are very sharp! Keep body parts away from the cutting area or serious in-
jury might result.
Note:
If the material seems too thick or too hard, do not force the shears to cut! Instead, use a
metal-cutting band saw to cut the workpiece.
Assembly
When first unpacking the shears from its shipping container, make sure that all parts are fully equipped
and not damaged (see the parts list for reference). The anti-rust grease on processing surfaces and
other parts can be removed with kerosene or another suitable degreaser.
To assemble and mount your shears, follow the steps below:
1. Secure the handle to the plate shears assembly using the included hex bolts and flat washers,
as shown in the diagram.
2. Place the shears on the workbench and use the holes in the base as a guide for drilling and
attaching the shears to the workbench.
3. We recommend using long hex bolts that go through the workbench and are secured from the
other side with flat washers and hex nuts, if possible. If it is not possible to use through bolts,
use lag screws with flat washers and fasten the screws directly into the workbench.
© by WilTec Wildanger Technik GmbH
Item 61577–61579
Page 5
http://www.WilTec.de
http://www.aoyue.eu
02 2021
-1