Work area safety
Warning!
Inspect the work area before each use. Keep the work area clean, dry, free of clutter and well
lit. Cluttered, wet, or dark work areas can result in injury. Using the tool in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
Do not use the tool in areas which have a risk of causing a fire or an explosion, e. g. in the
presence of flammable liquids, gases, or dust. The tool can create sparks, which may ignite
the dust or fumes.
Do not allow the tool to come in contact with an electrical source. Contact will cause a shock.
Keep children and bystanders away from the work area while operating the tool. Do not allow
children to play with the tool.
Be aware of all power lines, electrical circuits, water pipes, and other hazards in your work
area. Some of these hazards may be below the work surface hidden from your view and may
cause personal harm or property damage if unintentionally contacted.
Personal safety
Stay alert, concentrate on what you are doing, and use common sense when operating the
tool. Do not use the tool while you are tired or under the influence of drugs, alcohol or medica -
tion. A moment of inattention while operating the tool may result in serious personal injury.
Dress properly. Do not wear loose clothing, dangling objects or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught.
Use safety goggles or safety glasses with side shields or when needed, a face shield. Use a
dust mask in dusty work conditions. Also use non-skid safety shoes, hard hat, gloves, dust
collection systems and hearing protection when necessary. This applies to all people in the
work area.
Do not overreach. Keep proper footing and balance at all times.
Secure the work with clamps or a vice instead of your hand when practical. This safety pre-
caution allows for proper tool operation using both hands.
Use and care of the shears
Caution!
Do not apply to much force when using the tool. Tools work better and more safely when used
for the purpose for which they are designed. Plan your work and use the correct tool for the
work to do.
Check for damaged parts before each use. Carefully check that the tool will operate properly
and perform for its intended function. Replace damaged or worn parts immediately. Never op-
erate the tool with a damaged part.
Store the tool when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for a good working condition prior to storage and before re-use.
Only use equipment that is recommended by the manufacturer for use with your tool. Equip-
ment that may be suitable for one tool may create a risk of injury when used with another tool.
Never use equipment that has a lower operating speed or operating pressure than the tool it -
self.
© by WilTec Wildanger Technik GmbH
Item 61577–61579
Page 4
http://www.WilTec.de
http://www.aoyue.eu
02 2021
-1