Assembly
1. Fasten the jack to the frame by using a hexagonal screwdriver.
2. Place the plate on the head of the jack. Connect the plate to the frame using the two springs.
3. Fully lift the jack plunger with the handle.
4. Open the outlet valve on the lift by turning it counter-clockwise.
5. Before operating your pipe bender, make sure that there is no air trapped in the pipe bender.
Push the ram down until it fully retracts into the jack. This should displace all air.
6. Continue to press the top of the ram while closing the exhaust valve. Repeat if necessary.
Parts lists and explosion views
16 t pipe bender
№ Description
Quantity
№ Description
Quantity
1
Bending die
8
7
Handle
1
2
Tensions spring plate
1
8
Bolt M14×35
2
3
Spring
2
9
Pin
1
4
Bottle jack
1
10
Roller
2
5
Bolt M8×20
2
11
Pin 2
4
6
Washer
2
12
Roller pin
2
© by WilTec Wildanger Technik GmbH
Item 61490, 51840
Page 4
http://www.WilTec.de
http://www.aoyue.eu
01 2021-1