WilTec 52367, Руководство пользователя, Страница: 3 / 12

© by WilTec Wildanger Technik GmbH Item 52367 Page 3
http://www.WilTec.de
http://www.aoyue.eu 03 2022-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
Read these safety instructions before using the device and only use the device according to its
purpose.
•
The mark “ Attention! ” would like to direct your attention to an important safety aspect to be
observed absolutely. Non-observance can cause severe consequences.
•
Keep these instructions in a safe place to be always able to refer to them.
Attention! Only use drinking-quality water as water source. This device can remove chlorine rests and
turbid particles from the tap water; however, it cannot transform non-drinking water into drinking water.
Correct use of filtered water
•
Before the first use of a day, let the water run through during 10 s before using it.
•
After a period of more than two days of non-use of the device, let the water run through during
1
min before using it.
•
Keep the outlet of the filtered water clean.
•
Use the water as quickly as possible.
•
The moment of exchange of a filter cartridge depends on several factors (quantity, quality, pres-
sure of the water, etc.).
•
After a period of more than two weeks of non-use of the device, exchange the filter cartridge.
Preventing leaks and accidents
•
Do not use soap, detergent, thinner, alcohol, etc. to clean the device; these substances might
damage the filter.
•
Do not use the filter if it is damaged. Using a damaged filter can provoke splashes of water from
the filter.
•
Do not remove the filter from the water tap during filtration. This could damage the filter and
provoke leaks.
•
Make sure that neither the filter nor the tap touches another object during use; otherwise, the
filter could jump off the water tap.
•
Do not let water hotter than 35 ℃ run through the Water side of the device; this can reduce the
capacity of the active carbon and provoke errors.
•
Do not let water hotter than 50
℃
run through the Raw water side of the device; this can provoke
deformations of parts of the filter.
•
Neither obstruct the water outlet nor connect other devices/accessories. If you do so, errors and
damages might follow.
•
Make sure that the device does not freeze. This could damage the filter and water tap.
•
Whenever the water pressure is too high, adjust a lesser flow rate.
•
Avoid hots surfaces; heat might deform or damage the device.