
© by WilTec Wildanger Technik GmbH
Item 52367
Page 10
03 2022-1
Mounting or replacing a filter
Attention!
Before replacing a filter, you will need to close the water tap and set the selector switch to
the Raw water side. Then you can replace the filter.
Step
1
Remove the water filter case.
Ceramic filter car-
tridge
Step
2
Install or replace a filter.
Attention!
Remove the plastic bag of the
cartridge before installing.
Filter cartridge
LT-CM-1
Carbon fibre
filter element
Filter cartridge
LT-CF-1
Remove
Install
Step
3
Insert the filter cartridge/pull out the base
and tighten the filter insert to protect the
case.
Attention!
Remove the plastic bag of the
cartridge before installing.