© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Seite 5
The Method of replacing the UV light tube
This applies only to UV-Unit models
7. At any condition, when the barrel is seperated by the cover, the
protect switch will be off. Then the UV will be extinguish to avoid
the damage to body.
1. According to the diagrammatic pre-
sentation (1), please open the lid from
the mail body carefully. Put the lid in
inversion, then hold the quarzhose
tube and circumgyrate it lightly, just as
the picture shows.
When the gap of the quartzhose tube
and the gap of the connection of the
light tubes are accordant, pull out the
quartzhose tube.
2. According to the diagrammatic re-
presentation, pulling out the bad light
tube.