background image

 

© by WilTec Wildanger Technik GmbH  

Item 50133

–50143 

Page 3 

 

http://www.WilTec.de

 

http://www.aoyue.eu   

   

09 2021

-1

 

http://www.teichtip.de

 

 
Introduction

 

 
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to 
always take some basic safety precautions when using this product. Please read this operating manual 
carefully and make sure that you understand it. 
Keep these operation instructions in a safe place. 
 
 

Safety instructions 
 

 

Before use, carefully read all safety and other instructions found in this manual. Non-observance 
might lead to injuries or damages. 

 

During assembly, make sure to firmly tighten the screws to ensure safe use. 

 

Check the spreader for damages before every single use. Do not use the spreader if it is defec-
tive. 

 

The spreader is only suitable for private use. It is not suitable for commercial or industrial use. 

 

 Attention!

 This device may only be used by persons with reduced physical, sensory, or 

mental abilities or a lack of experience or knowledge in case a person familiar with the device 
and responsible for their safety has instructed and supervises them. 

 

Children must not use the device and should be supervised when they are near it to ensure that 
they do not play with it. 

 

Wear appropriate protection equipment, e.g., protective gloves, goggles, and working shoes. 

 

Keep the parts of your body away from moving parts. 

 

Only use the spreader if you have a safe and stable working position. Pay particular attention 
to safe use on black ice and in wet conditions. 

 

The spreader is only suitable for fertilisers, seeds, or de-icing salt. Use of other filling materials, 
not being in accordance with proper use, is forbidden. 

 

When spreading fertilisers and de-icing salt, make sure to comply with local prescriptions and 
the grit manufacturers’ safety instructions. 

 

Do not use the spreader near other persons or animals. 

 

Only use the spreader in walking pace. Never run with the spreader. 

 

Do not use the spreader in rain or strong wind. Never leave it out in the rain. 

 
 

 

Содержание 50133











Отзывы: