
Troubleshooting (problems with the chicks)
# Problem
Possible reasons
Measures
1
Too much egg
white or unfer-
tilised eggs
(a) Wrong ratio of male and female an-
imals
(a) Check the mating conditions accord-
ing to the breeder’s recommendations.
(b) Male animal is malnourished
(b) Feed the roosters separately, so that
the chickens do not take most of the food.
(c) Interruption of male animals during
mating
(c) Do not use too many male animals;
keep the breeding roosters together; build
a non-permanent solid separation wall
between the individual breeding coop or
separate them within bigger breeding
coops
(d) Damaged combs and gills on the
roosters
(d) Ensure that their coop is comfortable
and there is enough suitable drinking wa-
ter.
(e) Rooster is too old
(e) A young rooster is required
(f) Rooster has been sterilised
(f) An unsterilised rooster is required
(g) The egg has been stored for too long
or under the wrong circumstances be-
forehand
(g) Do not keep the eggs for more than
ten to twelve days; store them at a cool
temperature (8–15°C) with a relative hu-
midity of 75–80%. Turn the eggs at least
once a day around their longitudinal axis
2
Blood dots
which point to
an early death
of the embryo
(a) Temperature of the incubator is too
high or too low
(a) Check the thermometers, thermostat
and the electricity, follow the instructions
of the manufacturer
(b) See 1 (g)
(b) See 1 (g)
3
Broken egg-
shells
(a) See 2 (a)
(a) See 2 (a)
(b) Eggs were not turned properly
(b) Turn the eggs frequently, at least 4–5
times a day; always turn them into the op-
posite direction
(c) Inefficient feeding, if the death rate is
high on days 10 and 14
(c) Check the feeding
(d) Ventilation of the incubator faulty
(d) Increase the air flow by normal means
(e) Infectious diseases
(e) Only use eggs from healthy stock;
check the hygiene measures
4
Eggs which will
not hatch
(a) Inefficient humidity in the incubator
(a) Increase the evaporation surface with
water or sprays
(b) Too high humidity at a too early
stage
(b) Check the humidity temperature
measurements
(c) Problems with the food
(c) Check the food
5
(a) Hatching
too early
(a) Temperature too high in the incub-
ator
(a) (b) (c) Adjust the temperature regula-
tion accordingly/adjust it properly
(b) Hatching
too late
(b) Temperature too low in the incubator
(c)
Sticky
chicks
(c) Temperature in the incubator most
likely too high
6 Deformed
chicks
(a) Temperature is too high in the incub-
ator
(a) See 2 (a)
(b) Temperature in the incubator is too
(b) See 2 (a)
© by WilTec Wildanger Technik GmbH Item 50039, 50041, 51074–51077, 51271–51274
Page 16
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1