Contact Wilson Electronics Customer Support Team with any questions
at 866-839-9361 or email: [email protected].
2
ENGLISH
Signal Meter Operation
To Turn the Device On
Hold the LEFT button for 3 seconds.
The device will begin with the
operational mode that was last used.
"
To Turn the Device Off
1. The device will automatically
turn off after a set time if the
sleep timer is enabled.
2. The device will automatically turn
off if the battery reaches 0%.
3. The device can manually be
turned off from the main menu
by highlighting the OFF selection
and pressing the RIGHT button.
"
$
"
"
Operational Mode
Operational modes can be selected
from the main menu. To bring up the
main menu:
1. Hold the LEFT button for 2
seconds.
-
-
-
-
$
There are three operational modes:
1. Single Frequency – A single
frequency can be selected where
bandwidth is approximately
1.5 MHz.
a. Frequencies can be changed
by pressing either the
MIDDLE button or the RIGHT
button.
b. Bands can be changed by
pressing the LEFT button.
2. Channel Power – The entire
channel can be selected where
bandwidth is displayed on the
screen.
a. Channels can be changed by
pressing either the MIDDLE
button or the RIGHT button.
b. Bands can be changed by
pressing the LEFT button.
3. Spectrum Power – The entire
bands spectrum is displayed on
the screen.
a. Frequencies can be changed
by pressing either the
MIDDLE button or the RIGHT
button.
b. Bands can be changed by
pressing the LEFT button.
