2
General
Your Wilson amplifi er has been carefully engineered to signifi cantly improve the performance of
your phone. Together with an outside antenna, the amplifi er’s state-of-the-art circuitry is designed to
increase your phones signal to and from the cell site, up to 20 times greater than the phone alone. The
U-Booster™ reduces disconnects and dropouts and increases data communication rates on 2G and 3G
networks.
How it Works
With the phone in the cradle and while using a wireless Bluetooth headset (or wired hands free device)
the outside antenna collects the cell tower signal and sends it through its cable to the amplifi er located
inside the cradle. The signal is then boosted by the amplifi er and sent to the phone via the built-in
antenna inside the cradle. When the phone transmits, the signal is picked up by the antenna inside the
cradle, boosted by the amplifi er and broadcast back to the cell tower via the outside antenna.
Before Getting Started
This guide will help you properly install the Wilson U-Booster
™
Dual-Band Wireless Amplifi er.
It is important to read
through all of the installation steps prior to actual installation.
If you do not understand the instructions contact
Wilson Technical Support at 866-294-1660
.
Wiring Diagram
Provides power to both the
amplifi er and charging for
the phone
Various
mounting
options
available
Exterior
Antenna
s
g
s
Vehicle Installation
Exterior antenna
communicates
with cell site
Amplifi er boosts
signal to and from
cell site
Provides power to both the
amplifi er and charging for
the phone with the correct
optional charging cable
