Wilson Electronics The Duette, Руководство пользователя, Страница: 32 / 81

on the appropriate side) of your Duet -
tes above the Magnepods. The magnetic
force will center the cone in its proper
location. The cones will now be at -
tached to the Duette, secured by the
Magnepods.
Remove the adhesive backing from
an “O” shaped cone gasket and careful -
ly place one over each cone. Smooth
the gasket around the cone, making
sure the adhesive has good contact to
the bottom of the Duette. See Figure 8.
The Duette is now ready to place
on the shelf.
Note: It is important to properly install
the cone gasket to prevent the Duette
from sliding on its cone.
Positioning the Duette on Bookshelf
Refer to the above tables and graphs (pages 26-29) to gain an understanding of
how Duette’s performance is affected by various vertical and horizontal placements.
The Duette benefits from fine tuning both side to side as well as front to back tuning,
within the constraints and limits of the shelf. The Duette should be slightly “toed-in”
toward the listener, such that, from the seated position, the listener sees a small portion
of the inside of each cabinet.
Note: Even when resting on its brass discs, take care when moving Duette as there is
still risk of scratching the shelf beneath.
D
u e t t e
O
w n e r
’
s
M
a n u a l
W i l s o n A u d i o S p e c i a l t i e s
f
igure
8 - t
he cone gaSketS are inStalleD over
the geometric coneS
�