Wilson Electronics The Duette, Руководство пользователя, Страница: 19 / 81

s
e C t i O n
2 – D
u e t t e O n a
s
t a n D
1
W i l s o n A u d i o S p e c i a l t i e s
constructed from very high quality materials, such as Wilson’s proprietary “X” mate-
rial. It has been optimized to compliment the Duette loudspeakers and requires no
additional treatment or filling.
Carefully turn your Duette over and place it on its top on a surface that will not
scratch its finish. Position three cones, flat side against the painted surface, on the
bottom of the Duette over the Magnepods. The Magnepods will automatically position
the cones at or very near their correct locations. Carefully press the putty side of each
brass disc down onto one of the spike points. Seat the tip of the point firmly into the
recess in the disc. Align each disc so that it is parallel with the bottom surface of the
Duette. Turn the Duette over and carefully align the bottom of the Duette with the top
plate of the stand. The brass discs should be directly above the recesses in the stand
top plate. Lower the Duette so that discs seat down into the recesses.
Place the Novel Crossover into the machined recess on the lower stand plate. Us -
ing the appropriate umbilical (See the above table, page 15), attach the Novel to the
Duette. The umbilical is configured with a separate woofer cable and tweeter cable.
Attach the cable labeled “Tweeter” to the tweeter binding posts on the Duette and the
Novel. Attach the woofer cable to the posts labeled “Woofer”.
Note: It is very important that you connect the umbilical properly. Failing to do so
will greatly compromise the performance of your Duettes. Do not use a non-Wilson
wire assembly between your Duette and Novel. This will severely compromise the
performance of your Duettes and void your warranty.
Final Positioning of the Duette
Please refer to Section 6 for instruction on voicing your Duettes. Your Wilson
Audio Dealer has been trained in the art of speaker setup and is your best resource in
obtaining the best sonic result with your Duettes.
Note: Do not install the Duette Stand stand spikes until you have completed final
setup.