background image

5

For free U.S. based technical support or to order accessory items please call 

800-204-4104 or visit www.wilsonelectronics.com

For free U.S. based technical support or to order accessory items please call 

800-204-4104 or visit www.wilsonelectronics.com

Green

 light is on : 

Sleek™ is operating properly

SYMPTOM:  No light, or light always off 

1)  Make sure that the power supply for the Sleek™ is 

functioning properly, by making sure the light located 

on the power supply is lit.

2)  If the DC plug-in power supply is properly inserted, 

but the plug’s light doesn’t come on, then check the 

12 volt power from the car socket, and check the 

fuse in the DC plug-in power supply.

Installing a Wilson Outside Antenna in a Building

Follow the specific antenna instructions included with the outside antenna (sold separately except for 

certain kits). These instructions assume that you are using a Wilson Mini Magnet-Mount Antenna and 

the optional suction-cup window bracket.
To receive the best signal, select a window on the side of your building where your outside signal is 

the strongest. 

Attach the suction-cup bracket to the inside of a window so 

that the cable will reach the location of the Sleek™. Place 

the bracket as high on the window as possible for best 

performance.

Once the bracket is in place, attach the magnet base of the 

antenna to the flat surface of the bracket. Note: the antenna 

must be installed vertically. Signal performance will be 

degraded if the antenna is not vertical.

Building Installation

Suction cup Antenna Window Mount is

available from Wilson Electronics.

www.wilsonelectronics.com or call 800-204-4104

SYMPTOM: No increase in Bars

1)  Make sure that the antenna connector is tight.
2) 

 The cell phone must be placed in the 

Sleek™ cradle to  amplify properly.

3)  Call Wilson Technical Support at 866-294-1660.

Understanding the Sleek

TM

 Lights 

Separation of Sleek™ and the outside antenna is very important.

  In a vehicle, the metal roof 

acts as a barrier and helps shield the two antennas from each other, preventing oscillation.
Oscillation can occur when the roof mounted antenna is too close to the Sleek™ inside the vehicle. 

An oscillation (or feedback) in the Sleek™ is similar to when a microphone is too close to a speaker 

in a sound system, resulting in a loud whistle.  An oscillation in the Sleek™, if allowed to occur, can 

affect nearby cell sites’ ability to handle calls.

 

Warning:

  

DO NOT use phone covers that have chrome or any other metallic surface. It may block cellular signals

Содержание SLEEK 2B5225









Отзывы: