4
Need help?
www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
3. Install the Low-Profile inside antenna.
• Identify a place on the right side of
the driver’s seat to mount the inside
antenna. The location should be
at least 18 inches from where the
cellular device will be used.
• Install the inside antenna at the same
angle as the cell phone when held in
use or near the laptop’s cellular data
card to maximize signal strength.
For a more professional look, you can
install the inside antenna underneath
a car seat cover or upholstery.
• When you have tested the
functionality of your Mobile 4G
Signal Booster, mount the inside
antenna by peeling off the backing
of the Velcro
®
and attach it to your
selected location on the seat and
secure the inside antenna.
4. Place and connect the Mobile 4G
Signal Booster.
• Select a location for the Signal
Booster that is free from excessive
heat, direct sunlight and moisture
and that has proper ventilation. Good
locations include underneath a seat
or under the dashboard.
• Connect the wire from the outside
antenna to the port labeled “outside
antenna” on the Signal Booster.
• Connect the wire from the inside
antenna to the port labeled “inside
antenna” on the Signal Booster.
• Plug the power adapter into
vehicle’s 12V DC power supply
and attach the cord to the side of
Power Booster labeled “Power.”
NOTE: Do NOT connect the power
to the Signal Booster until you have
connected both the inside and
outside antennas.
• Power up your Signal Booster by
flipping the switch on the back of the
DC power adapter on. A red light
should appear on the power adapter.
Note: The Mobile 4G Signal Booster
may remain on, in vehicles whose
12V DC power sources do not
automatically shutdown when the
vehicle is turned off. This could result
in discharging the vehicles battery in
one to two days.
Note: Some 12V DC power sources are
shut down when the vehicle ignition
is turned to off. Refer to your vehicle
owners manual for specifics related
to your vehicle.
NOTE: The aluminum casing of your Signal
Booster will adjust to the temperature of its
environment, but is designed to protect the
Signal Booster technology. For example,
in the summer, the Signal Booster case
may be as hot as 150 degrees inside your
vehicle. These high temperatures will NOT
damage the Signal Booster, nor do they
pose a fire risk to the vehicle. Again, be sure
to place your Signal Booster in a location
with adequate ventilation and away from
direct sunlight or moisture.
