3
Need help?
www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
Before Getting Started
Before you install your Mobile 4G™
Booster and start enjoying improved
cellular reception please do the following:
1. Read through all the installation
steps. This will help you know what to
expect from start to finish.
2. Watch the YouTube video
demonstrating the Mobile 4G Signal
Boost installation at:
wilsonelectronics.com/Mobile4Gvideo
3. Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces are
referenced in the instructions.
Installation
You can install your Mobile 4G Signal
Booster in your vehicle using the following
steps. NOTE: Before completing your
installation, create a “soft” installation by
putting the components of your Mobile 4G
Signal Booster in place and testing the
operation before mounting equipment.
1. Install the outside antenna. Select a
location on top of the car that is:
• Near the center of the vehicle’s roof.
• At least 12 inches from any other
antennas.
• Free of obstructions.
• At least 6 inches from any windows
(including sunroofs).
• At least 8 inches from any people.
The outside antenna must be installed
vertically on a metallic surface.
2. Run the outside antenna cable into
the car. The cable is strong enough
that it may be shut in most vehicle
doors without damaging the cable.
For a cleaner look, carefully pull down
the door seal, run the cable under
the seal, and push the seal back into
place. This method reduces wear
on the cable as the door opens and
closes.
Package Contents
Mobile 4G
™
Signal Booster
Mini-Mag
Outside Antenna
301126
Slim Low Profile
Inside Antenna
311127
DC Power Supply
5V / 2.5A
859948
Optional Antennas
12” Mag Mount
Outside Antenna
311103
NMO
Outside Antenna
311104-5810
Marine
Outside Antenna
311130-5810
Trucker
Outside Antenna
311101
Appearance of device and accessories may vary.
