Wilson Electronics Grand Slamm Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 80

Wilson Electronics Grand Slamm Скачать руководство пользователя страница 63

W I L S O N A U D I O S P E C I A L T I E S , I N C .

WILSON AUDIO LOUDSPEAKER

L I M I T E D W A R R A N T Y

TERMS AND CONDITIONS

LIMITED WARRANTY

Wilson Audio warrants its loudspeakers to be free of manufacturing defects in material and workman-
ship, subject to the conditions hereinafter set forth for a period of 90 days from the date of purchase by
the original purchaser, of ﬁve (5) years, if a Warranty Registration Form has been correctly ﬁled at Wilson
Audio, no later than 30 days after product delivery to the customer.

CONDITIONS

This warranty is subject to the following conditions and limitations.  The Warranty is void and inap-
plicable if the product has been used or handled other than in accordance with the instructions in the
owner’s manual, abused or misused, damaged by accident or neglect or in being transported or the
defect is due to the product being repaired or tampered with by anyone other than Wilson Audio, or an
authorized repair center.  Most repairs can be made in the ﬁeld by an authorized Wilson Audio agent.  In
instances when return to Wilson Audio’s factory is required, a return authorization must ﬁrst be obtained
by the dealer or customer.  Wilson Audio will pay return freight of its choice.  A RETURNED PRODUCT
MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT.  Wilson Audio reserves the right
to modify the design of any product without obligation to purchasers of previously manufactured prod-
ucts and to change the prices or speciﬁcations of any product without notice or obligation to any per-
son.

REMEDY

In the event that the above product fails to meet the above Warranty and the above conditions have
been met, the purchaser’s sole remedy under this Limited Warranty shall be to return the product to
Wilson Audio or to an authorized Wilson Audio repair center where the defect will be rectiﬁed without
charge for parts or labor.

S

E C T I O N

5 . 0 W

A R R A N T Y

I

N F O R M A T I O N

5-1

X-1/ G

RAND

SLAMM O

WNER

’

S

M

ANUAL

«
...
61
62
63
64
65
...
»

Содержание Grand Slamm

















































































Отзывы:

Нет отзывов