Wilson Electronics Grand Slamm, Руководство пользователя, Страница: 39 / 80

W I L S O N A U D I O S P E C I A L T I E S , I N C .
4-1
S
E C T I O N
4 . 0 X - 1 / G
R A N D
S L A M M S
Y S T E M
S
E T U P
S
ECTION
4.0- I
NITIAL
A
SSEMBLY
In order to realize the capabilities of the
X-1/Grand SLAMM we recommend that you have it
installed by a trained Wilson Audio installer. Your
dealer will have a person trained in the art of the
X-1/Grand SLAMM installation. If you choose to
do this installation yourself, here are some guide-
lines to assist you. These guidelines come from
many years of experience and should be followed
closely.
The first step in building your Grand
SLAMMs is to remove protective film. To remove,
just start at the edge and peel it off.
Each timing blade has been marked with
two numbers on the bottom surface. There are cor-
responding numbers on the woofer enclosure(see
Figure 9). Set the timing blades near the respec-
tive woofer enclosure. Remove the fascia from the
timing blades, noting how they fit together and the
lengths of the screws in the holes (see Figure 10).
Each fascia and blade are a matched set, be sure
to keep them together. The bottom surface of each
fascia and the corresponding surface of the timing
blade have been marked A-D, Fascia A matches tim-
ing blade A, etc.
M
ATCHED
N
UMBER
L
OCATIONS
F
IGURE
9 M
ATCHED
N
UMBER
L
OCATIONS
ON
F
ASCIA
A
SSEMBLY
T
IMING
B
LADES
F
IGURE
10 E
XPLODED
V
IEW OF
F
ASCIA