8
Powering up the Amplifi er
Make sure both the outside antenna and
Cradle Plus (or universal connector)
cables are connected before powering up
the amplifi er.
Connect the power cable from the DC
power supply to the amplifi er input marked
“Power” and insert the large end into DC
power socket (the cigarette lighter outlet).
The amplifi er may remain on all the time. However, leaving the amplifi er on in a vehicle
when it is not running can discharge the battery in a day or two.
A good option is to power the amplifi er through the ignition switch so the amplifi er is turned
on and off with the vehicle.
Carefully insert the power cable.
IMPORTANT: Do not power up the
amplifi er unless the antenna and Cradle
Plus cables are attached to the amplifi er.
Warning:
Use only Wilson power
supply units. Use of a non-Wilson
product may damage your equipment.
!
12 V DC power supply (included)
AC/DC power supply (not included)
Connecting the Earbud
Plug the earbud into your cell phone and carefully place the earbud’s speaker into your ear.
