WILSON AUDIO Sasha WP, Руководство пользователя

Страница: 32 / 72

S A S H A
W / P
O w n e r ’ s M a n u a l
32
W i l s o n A u d i o S p e c i a l t i e s
provide proper coupling of the Upper Midrange/Tweeter Module to the Woofer Module
and are used to correct propagation delay. “A” spikes are always installed in the front
two positions (the threaded holes located near the bottom front of the enclosure). The
spike-type is stamped in the round top of the spike. These two spikes screw into the
Upper Midrange/Tweeter Module as shown in Figure 3. The spikes should be screwed
in all the way, until they are hand tight. Do not over tighten spikes.
Mounting the Upper Midrange/Tweeter Module
• Place the Woofer Module enclosures into the selected room location (as
determined by Section 1).
• Measure the listening distance and ear height (see example on Woofer
Module top).
• Using the Prop -
agation Delay
Correction Ta-
ble, select the
required Align-
ment Spike.
• Install the rear -
Alignment Spike
until snug in the
single rear hole.
• Carefully, place
the Upper Mid-
range/Tweeter
Module’s two
front spikes into
the rear of the
Woofer Module
guide track (see
Figure 4). Hold
W i l s o n A u d i o S p e c i a l t i e s
f
igure
4 – t
op of the
W
oofer
m
odule
,
With Spike guideS And
reAr Spike receptAcle
�
U
pper
M
idrAnge
/
T
weeTer
M
odUle
S
pike
p
lAceMenT
g
Uide
p
hASe
d
elAy
c
orrecTion
T
Able
p
AinTed
i
nner
e
dge And
Top of
w
oofer
M
odUle