WILSON AUDIO Alexia V, Руководство по установке и эксплуатации

Страница: 20 / 50

20
a
l e x i a
V i
n s Ta l l aT i o n a n d
C
a r e
g
u i d e
Note: Before setting up Alexia V, please carefully study Section 1 and/or watch the WASP video.
They provide valuable information on determining the ideal room location for your speakers.
Section 3.1—Initial Assembly
Preparation
You will need the following items:
• Supplied Tool & Spike Kits
• Tape Measure
• Time Alignment Charts (see Section 6)
• Known Listening Position
• Masking Tape & Pen
Take a moment to familiarize yourself with the top of the Woofer Module. A complete set of Time
Alignment Charts is located in Section 6.
Upper Array Assembly
The Upper Array uses “AA” spikes on the front of the enclosure (see graphic above) and the built-
in spike/receptical found at the bottom rear of the enclosure. In some installation positions the Time
Alignment Charts will indicate a need to thread the #2 spike into the spike receptical found at the bot-
tom rear of the enclosure. The spikes rotate the Upper Array to a scribed position as a part of the Alexia
V’s propagation delay adjustment and correction. Shorter “AA” spikes are always installed in the front
two positions (the threaded holes located near the bottom front of the enclosure). The spike-type is
A u t h e n t i c E x c e l l e n c e
“AA” Spikes