WILSON AUDIO Alexandria X-2 Series, Руководство пользователя

Страница: 49 / 93

W I L S O N A U D I O S P E C I A L T I E S , I N C .
S
E C T I O N
3 . 2 - M
O U N T I N G
U
P P E R
A
R R AY
M
O D U L E S
The upper range signal cables are labeled so that they can be easily attached to their appropriate module.
This is accomplished as follows:
• Locate the cable marked “Lower Mid.” Dress this cable through the handle opening and connect this
cable to the Lower Midrange Module (LMRM) loudspeaker binding post (see Figure 18).
• Locate the cable marked “Front Tweeter.” Dress this cable through the handle opening and connect it
to the High Frequency Module (HFM) loudspeaker binding post (see Figure 18).
• Locate the cable marked “Upper Midrange.” Locate the binding post on the rear of the Upper
Midrange Module (UMRM) labeled “Mid Frequency.” Carefully thread the speaker cable up through
the hole located in the wing support and through a corresponding hole located on the module support
blade just below the speaker terminal (see Figure 19).
3-9
F
IGURE
19 - C
ONNECTING THE
C
ABLES TO THE
U
PPER
M
ODULES