WILSON AUDIO Alexandria X-2 Series, Руководство пользователя

Страница: 47 / 93

W I L S O N A U D I O S P E C I A L T I E S , I N C .
the woofer enclosure (see Figure 17). Ensure that the Tether Bolts are protruding through the slots
provided in the module handle. There are alignment tracks that accommodate the spikes. Refer to the
Group Delay Table to determine the numbered indent in which to rest the rear spike.
• It is now safe to install the rear spike
by lifting the module by its rear
handle and carefully screwing in the
spike.
• The rear spike track is indexed
numerically. Refer to your marks on
the Group Delay Table in Section 8.0
to determine the numbered detent in
which to rest the rear spike.
Next install the High Frequency Module
(HFM) as follows:
• With the front pair of short spikes
pointing down, carefully lower the
HFM between the alignment wings
and set the front two spikes on top of
the LMRM enclosure. Align the
spikes into the alignment tracks.
Install the rear spike by lifting the rear
of the HFM and carefully screwing it
in.
• Refer to the Alignment Table to
determine the proper location of the
rear spike, noting that the position
will be different from the LMRM.
Next install the Upper Midrange Module
(UMRM) as follows:
• With the front pair of short spikes point-
S
E C T I O N
3 . 3 - M
O U N T I N G
U
P P E R
A
R R AY
M
O D U L E S
F
IGURE
17 - I
NSTALLING
U
PPER
M
ODULES