manualshive.com logo in svg

Wilo Wilo-EMU FA + FK 17.1, Инструкция по установке и эксплуатации

Поделиться
Скачать
Wilo Wilo-EMU FA + FK 17.1 Скачать руководство пользователя страница 14

en

Transportation and storage

14

WILO SE 2017-06

Example: Wilo-EMU FA 30.93D + FK 34.1-6/33KEx-E3

Ex

Ex-rated

E3

IE-efficiency class (derived from IEC 60034‑30)

4.8

Scope of delivery

▪ Pump with free cable end
▪ Cable length per customer request
▪ Mounted accessories, e.g. external pencil electrode, pump support foot, etc.
▪ Installation and operating instructions

4.9

Accessories

▪ Suspension unit
▪ Pump support foot
▪ Special versions with Ceram coatings or special materials
▪ External pencil electrode for sealing chamber control
▪ Level control devices
▪ Fixation accessories and chains
▪ Switchgear, relays and plugs

5

Transportation and storage

5.1

Delivery

After receiving the shipment, this must be checked immediately for defects (damage,
completeness). Defects must be noted on the freight documentation! Furthermore, de-
fects must be notified to the transport company or the manufacturer immediately on
the day of receipt of shipment. Subsequently notified defects can no longer be asser-
ted.

5.2

Transport

WARNING
Standing beneath suspended loads!

Never allow anyone to stand under suspended loads! Danger of (serious) injuries
caused by falling parts. Loads may not be carried over work places where people are
present!

WARNING
Head and foot injuries due to lack of protective equipment!

Danger of (serious) injuries during work. Wear the following protective equipment:

• Safety shoes

• Safety helmet must be used if lifting equipment are used!

NOTICE
Only use lifting equipment in a technically sound condition!

Only use lifting equipment in a technically sound condition for lifting, lowering and
transporting the pump. Ensure that the pump does not become jammed during lift-
ing and lowering. Do 

not

 exceed the max. permissible bearing capacity of the lifting

equipment!

Only remove the outer packaging at the place of utilisation to ensure that the pump is
not damaged during transport. Use tear-proof plastic sacks of sufficient size to pack-
age used pumps for transport in a leak-proof manner.

The following points must also be observed:

Содержание Wilo-EMU FA + FK 17.1





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды