Wilo Helix2.0-VE Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 92

background image

en

14

Installation and operating instructions • Drive for Wilo-Helix2.0-VE / Wilo-Medana CH3-LE • Ed.01/2022-06

DANGER

Risk of fatal injury due to lack of protective device!

Due to missing protective devices of the drive, electric shock or contact
with rotating parts can lead to life-threatening injuries.
Before commissioning, safety devices such as inverter cover or coupling
covers that were removed must be reinstalled!

WARNING

Potentially fatal injury due to drive not being installed!

A life-threatening voltage may be present at the motor contacts! Normal
operation of the pump is only permitted with the drive installed.
Never connect or operate the pump without the drive mounted!

WARNING

Risk of fatal injury from falling parts!

The drive itself and drive parts can be extremely heavy. Falling parts pose
a risk of cuts, crush injuries, bruises or impacts, which can be fatal.

.

Always use suitable lifting equipment and secure parts against falling.

.

Never stand underneath a suspended load.

.

During storage and transport, as well as before all installation and as-

sembly work, ensure that the drive is in a safe position and standing se-
curely.

WARNING

Personal injury due to strong magnetic forces!

Opening the motor leads to high, abruptly occurring magnetic forces.
This can lead to serious cuts, crushing injuries and bruises.
Do not open the motor!

WARNING

Hot surface!

Opening the motor leads to high, abruptly occurring magnetic forces.
This can lead to serious cuts, crushing injuries and bruises.
There is a risk of burns!
Allow the pump to cool down before commencing any work!

6.4

Permitted installation positions
and change of the arrangement of
components before the installation

Fig. 4:

Arrangement of the components upon delivery (Fig. 4)

The component arrangement concerning the pump housing is pre-assembled as a factory
setting and can be changed at the operating location if required. This may be necessary, for
example, in the following cases:

«
...
12
13
14
15
16
...
»

Содержание Helix2.0-VE





























































































Отзывы:

Нет отзывов

Похожие инструкции для Helix2.0-VE

Бренд: Panasonic Страницы: 100

Aquarea WH-MDF09C3E5

Бренд: Panasonic Страницы: 90

Бренд: Panasonic Страницы: 80

Бренд: Samoa Страницы: 32

Бренд: Zoeller Страницы: 12

Бренд: RBI Страницы: 48

Бренд: Waterous Страницы: 10

DURA-Power DRE-52

Бренд: A.O. Smith Страницы: 26

DURA-Power DRE-52

Бренд: A.O. Smith Страницы: 20

Xsential QUAD-RO

Бренд: Watermark Страницы: 8

Бренд: Annovi Reverberi Страницы: 16

Бренд: Flux Страницы: 80

TV 301 Navigator 969-8918

Бренд: Varian Страницы: 55

Бренд: Ecoplus Страницы: 24

sanitary T Series

Бренд: TapFlo Страницы: 24

TERRA SWM 3-13 HGL P

Бренд: iDM Страницы: 44

Бренд: clage Страницы: 24

Бренд: Pearl Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды