Installation and operating instructions Wilo-ElectronicControl
22
English
Press the push-button
for 3 seconds to set the ElectronicControl. The user
can navigate in both submenus SETTINGS or HISTORIC.
SETTINGS
This submenu allows the setting of the ElectronicControl according to the
installation and the pump.
HISTORIC
This submenu displays the various counts and alarms recorded.
To select a submenu, use the the push-buttons
or
, then push
to
select it.
The values displayed in the various parameter can be changed via the push-but-
tons
or
. With the push-button
the new value selected is validated
and the next parameter is displayed on the screen. With the push-button
you exit SETTINGS (no saving of the last change) or HISTORIC menu and go back
to STANDARD display mode (or SERVICE).
NOTE: The data are saved in non-volatile memory, this allows to save data even
after switching off.
6.3.1 Menu description
Display
Menu level 1
Menu level 2
Description
NET P
P SET
02.0 bar
02.0 bar
Display in STANDARD
mode
F
P SET
NET P
Q
50 02.0 bar 02.0 bar
1
Display in SERVICE
mode
rotation frequency
(Hz) + pressure setting
(bar) + networkpres-
sure (bar) + flow
switch detection
(1 or 0)
MENU
SETTINGS
Menu settings
LANGUAGE
ENGLISH
LANGUAGE
Language setting
I. MAX. PUMP
OFF
I. MAX. PUMP
Nominal current set-
ting as mentioned on
the identification plate
of the pump
1_Wilo-ElectronicControl.book Seite 22 Montag, 11. Juli 2011 3:14 15
