background image

English

Installation and operating instructions Wilo-DrainLift M1/8

23

Please state all the information on the unit name plate when ordering spare parts.

5.3 Scope of delivery

Sewage lifting unit, including:
Switchgear (1~ 230 V/3~ 400 V),
1  inlet seal DN=100 (for pipe Ø 110 mm)
1  keyhole saw Ø 124 for inlet, DN=100
1  PVC hose section, Ø 50 mm, with clamps for inlet port, DN=50
1  special lip seal for suction pipe connection of diaphragm hand pump, DN=50
1  collar for ventilation connection, DN=70
1  set of fixation material 
6  sound absorption strips for insulation of structure-borne noise
1  DN=80/100 flange piece with flat gasket, flexible hose section, hose clips, screws and 

nuts for connecting the pressure pipeline, DN=100

1  set of installation and operating instructions

5.4 Accessories

Accessories must be ordered separately. For a detailed list and description, see the cata-
logue/price list.
The following accessories are available:

• Non-return valve (DN 80) for direct installation in the DrainLift M1/8 unit (already included 

in the scope of delivery of the DrainLift M1/8…RV)

• Flange piece DN=80, DN=80/100 (1 x DN=80/100 already included in the scope of delivery), 

DN=100, DN=150 for connecting the slide valve on the inlet or pressure side to the pipe

Mains frequency 

[Hz]

50 

Protection class

System: IP 67 (2 mWS, 7 days) 
Switchgear: IP 54

Speed 

[rpm]

2900 

Operating mode

S3-15 %/80 sec 

Max. switching frequency (pump)

[1/h]

45

Max. total delivery head

[mWS]

8.5

Max. permitted geodesic delivery head

[mWS]

6.5

Max. permitted pressure in the pressure 
pipeline

[bar]

1.5

Max. volume flow

[m³/h]

35

Max. fluid temperature

[°C]

40 (60 °C, 3 min)

Max. ambient temperature

[°C]

40

Max. solid grain size

[mm]

45

Sound pressure level 
(depending on duty point)

[dB(A)]

< 70 *

1)

Gross volume

[l]

62

Switching volume

[l]

24

Dimensions (WxHxD)

[mm]

600x505x580

Net weight

[kg]

40

Pressure connection

[DN]

80

Inlet ports

[DN]

40, 100, 150

Ventilation

[DN]

70

*

1)

 Improper system and pipe installation, as well as impermissible operation, can increase the acoustic 

emissions.

CE

WILO SE Dortmund

Nortkirchenstr. 100, 44263 Dortmund, Germany

09

EN 12050-1 

Faeces lifting unit for buildings, DN=80

Lifting power

- see pump curve

Noise level

- < 70 dB(A)

Corrosion 
protection

- coated, or corrosion-resistant 
   materials Inox/composite

5.2

Technical data

Содержание DrainLift M1/8




















Отзывы: